HP 5183-9078 180 Watt SFX Power Supply

* SFX Form factor
* 5" Wide X 2.5" Tall X 4" Deep
* One ATX 2.03 connector (20 pin)
* One 12V connector for P4 motherboards
* Three IDE 4 PIN connectors
* One Floppy 4 PIN connector
* One Video Power connector
* Voltage: 115/230 VAC
* Frequency: 47Hz - 63Hz
* Input current: 6.0 amps maximum / 115 Vrms, 60Hz; 3.0 amps maximum / 230 Vrms, 50Hz.
* Over-voltage protection: +5V: 6.5V (maximum); +3.3V: 4.6V (maximum); +12V:15.5V (maximum)
* Over-current protection: +3.3V:55A maximum; +5V:42A maximum; +12V:20A maximum
* Remote ON/OFF control: The power supply shall accept a logic collector level which will disable / enable all output voltage (excluding +5V standby).
* Power good signal: 115/230V (full load): 100 - 500 ms
* Efficiency: 65% min.
* Hold-up time: 16.6 ms minimum: at 115V / 60 Hz; 16.6 ms minimum: at 230V / 50 Hz.
* Operating conditions: ambient temperature 0°C~50°C
* Storage and shipping conditions: ambient temperature -20°C~+65°C
* Dielectric withstand: input / output 1800 VAC for 1 second, input to frame ground 1800VAC for 1 second

Output Min. Load Max. Load Load Reg. Ripple & Noise
+5Vsb 0A 2A ±5% 50mV P-P
-12V 0A 0.3A ±10% 120mV P-P
+12V 2.0A 10A ±5% 120mV P-P
+5V 1.0A 16/12.6A ±5% 50mV P-P
+3.3V 0.5A 11.5/16.7A ±5% 50mV P-P
-5V 0A 0.2A ±10% 120mV P-P