Thermaltake SwordM With Liquid Cooling Installed

SwordM, the master piece of PC chassis, is a true reflection of contrast between technological advances and artistic quality of hand-craftsmanship. The all-aluminum structures, while produced through automated equipments, are all fine-tuned to a level of excellence that can only be achieved by hands. And it is also due to the complexity and time-consuming attention-to-detail that makes SwordM a Limited Edition product.

Design concept of SwordM was derived from streamlined curves found on swords that were used exclusively by ancient Chinese warriors. Added modern emphasis that blends into the curves flawlessly to create a perfect balance of past, present and future. Hard convertible top breaks a traditional design of PC chassis to realize the true dream gaming PC that exhibits both utmost aesthetic appeal and cooling performance.


Cooling System - Liquid Cooling

Spacious interior design allows for extreme liquid cooling setup to support today's most advanced processors, graphic cards, hard disk drives. Pre-drilled holes on the back panel further enhance flexibility to support any external liquid cooling systems.

Performance radiator
(A) Dimension of radiator :
H 295 x W 216 x T 32 mm
(B) Two 1300RPM 120mm silent

P400 liquid pump
Powerful DC 12V liquid pump (400L/hr)

All copper water block
For Intel P4 775/478 and AMD AM2/K8

Water tube
Transparent UV tube (3/8") , industrial- grade rubber tube (1/4", pre-assembled)
SwordM incorporates thoughtful Cable Management design on the back of chassis to eliminate cable clutter. It also reserved built in mounting holes to mount water pumps and reservoirs and pre-drilled mounting for water tubes.
Reinforcement handles design for easy transportation.
Front accessible eSATA, USB 2.0, IEEE1394 and HD (High Definition) Audio ports.
Thumb screw and PCI tool-less design eliminates the need for tools for component installation.
Convertible top and side panel are all equipped with racing style hydraulic cam that swings opens effortlessly.
Tool compartment stores tools
used most often.
7’’ LCD monitor (optional: A2413-03)



Model

VD500LBNA
Case Type

Liquid Cooling Case
Dimension (H*W*D)

650 x 240 x 770 mm ; 25.6 x 9.4 x 30.3 inch
Material

Aluminum Extrusion
Color

Black
Cooling System

Front (intake) :
120 x 120 x 25mm blue LED fan, 1300rpm, 17dBA
Rear (Exhaust) :
Two 120 x 120 mm fans, 1300rpm, 17dBA
Top (Exhaust) :
Two 120 x 120 mm fans, 1300rpm, 17dBA
Motherboards


9.6" x 9.6" (Micro ATX),
12" x 9.6" (ATX),
12" x 13" (Extend ATX)
Drive Bays
-7” Drive Bay
-5.25” Drive Bay
-3.5” Drive Bay

2 -
4 or 6
3 (HDD) 3 (HDD)
Front I/O

e-SATA connector x 1,
USB2.0 x 2,
IEEE 1394 Firewire x 1,
HD Audio
Expansion Slots

7
Liquid Cooling System Application

Liquid Cooling System:
- All copper water block :
For Intel P4 775/478 and AMD AM2/K8
- Performance radiator :
(A) Dimension of radiator : H 295 x W 216 x T 32 mm
(B) Two 1300RPM 120mm silent fans
- P400 liquid pump : Powerful DC 12V liquid pump (400L/hr)
- Reservoir : Contains 350 c.c. of liquid capacity
- Water tube : Transparent UV tube (3/8") ,
industrial-grade rubber tube (1/4", pre-assembled)
Optional Components

7" LCD Monitor (P/N:A2413-03)